Pipework, Kitchens, Appliances, Cylinders & Outside Plumbing
The part of the job you’ll never see again – done to a standard that assumes someone will open it up in twenty years and judge us. Pipework and alterations, kitchen plumbing, appliance connections, hot water cylinders, outside taps, soil stacks and guttering across Wolverhampton, Telford, Shrewsbury and the wider Midlands.
Pipework installation & alterations
Extensions, renovations, loft conversions and knock-throughs. First fix runs are planned, clipped at proper centres, drilled through joists in the safe zone (a joist notched in the wrong place is a structural problem – it’s astonishing how often we find one), then pressure-tested and left under pressure so any weep shows in an open wall, not through a ceiling in six months.
If your floors are already up, that’s the lowest-cost hour you’ll ever spend on your plumbing – get us in before the boards go back. Copper where it’s visible or hot and exposed; quality barrier plastic for long buried runs and underfloor work. Most jobs are a mix – any plumber who says one is always better is telling you about their habits, not your house. Capping off done properly on drained pipe and labelled; boxing-in built square, tile-ready and with access panels. Builders: a five-minute conversation before the plasterboard goes on saves a week.
Kitchen plumbing
A kitchen is a plumbing job with cupboards on it, and the ninety centimetres under the sink is where most are let down. We do first fix (hot, cold and waste to sink, dishwasher, washing machine and softener positions) and second fix (sink, tap, trapped wastes, appliances, and an isolation valve on everything so a future tap change is a ten-minute job).
We work to kitchen fitters’ programmes across the region, and directly for homeowners. Boiling water taps: 100°C on demand, but plan for the under-sink tank, the fused electrical supply, annual filter changes — and in hard water, a scale filter or softener is the difference between a tap that lasts a decade and one that doesn’t. That’s not an upsell. Speaking of hard water: the Midlands runs hard to very hard, and scale is what kills boilers, shower valves and heat exchangers. A softener – fitted with a bypass and a hard-water drinking tap – protects the lot and keeps new brassware looking new.
Appliance connections • certificated where it needs to be
The retailer delivers it; “installation” means unwrapping it; gas is flatly refused.
We connect washing machines and dishwashers properly – isolation valves on the supplies, the right standpipe height and a trap so it can’t siphon or smell – and American fridge freezers without the self-piercing saddle valve (a known failure point and a classic hidden slow leak): a dedicated tee, its own isolation valve, and a service loop so the fridge pulls out.
Gas cookers are not a DIY job – it’s illegal for anyone not on the Gas Safe Register to work on a gas appliance. We check the supply and bayonet, fit the correct hose and a restraining chain, test for tightness, check ventilation and leave the certification.
Ask to see the Gas Safe ID card of anyone who touches gas in your home.
